Причіп з робочою платформоюMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Причіп з робочою платформою
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
Рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 10 800 кг
- Загальна вага:
- 14 400 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
Деталі пропозиції
- ID оголошення:
- A204-85-580
- Референсний номер:
- 62471a
- Оновлення:
- останній раз 21.01.2026
Опис
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
Cedpexvgrpsfx Ag Ajpu
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
Cedpexvgrpsfx Ag Ajpu
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 571 km
Причіп з робочою платформою
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Мала оголошення
Egestorf
1 572 km
Низькорамний причіп
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ваше оголошення було успішно видалено
Виникла помилка






























































