Низькорамний причіпMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Низькорамний причіп
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
Рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 10 800 кг
- Загальна вага:
- 14 400 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
Деталі пропозиції
- ID оголошення:
- A152-72-854
- Референсний номер:
- 6247
- Оновлення:
- останній раз 21.01.2026
Опис
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to reach 2,250 mm
----Electrics / Lighting:
Cpedpfx Aorwc R Asg Aeu
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm smooth sheet metal bulkhead
* Bolted rear stakes
* Side walls with spring-assisted lift
----Load Securing:
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing ring
* Various holes in the front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for truck-mounted hydraulic pump output over 40 l/min up to max. 140 l/min)
----Coating:
* Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear, and flange drawbar eye painted in black
* Side walls painted in RAL 9010 pure white
* Painting of side panels in any RAL color available as an option for a surcharge
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to reach 2,250 mm
----Electrics / Lighting:
Cpedpfx Aorwc R Asg Aeu
* Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm smooth sheet metal bulkhead
* Bolted rear stakes
* Side walls with spring-assisted lift
----Load Securing:
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing ring
* Various holes in the front and end crossmembers for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for truck-mounted hydraulic pump output over 40 l/min up to max. 140 l/min)
----Coating:
* Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear, and flange drawbar eye painted in black
* Side walls painted in RAL 9010 pure white
* Painting of side panels in any RAL color available as an option for a surcharge
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 571 km
Причіп з робочою платформою
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Мала оголошення
Egestorf
1 572 km
Причіп з робочою платформою
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ваше оголошення було успішно видалено
Виникла помилка

































































