Низькорамний причіпMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Низькорамний причіп
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
Рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 10 800 кг
- Загальна вага:
- 14 400 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
Деталі пропозиції
- ID оголошення:
- A204-85-575
- Референсний номер:
- 62471
- Оновлення:
- останній раз 21.01.2026
Опис
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
Cjdpjxvgriofx Ag Aspu
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Front support winch
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the front wall for retrofitting container locks
* Bolted 400 mm smooth sheet front wall
* Bolted rear stanchions
* Drop sides with spring assists
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings possible every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing point
* Various holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance)
* Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone
* Drop sides painted RAL 2011 deep orange
* Side panels available in a RAL color of your choice for an additional charge
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
Cjdpjxvgriofx Ag Aspu
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Front support winch
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the front wall for retrofitting container locks
* Bolted 400 mm smooth sheet front wall
* Bolted rear stanchions
* Drop sides with spring assists
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings possible every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing point
* Various holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance)
* Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone
* Drop sides painted RAL 2011 deep orange
* Side panels available in a RAL color of your choice for an additional charge
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 571 km
Причіп з робочою платформою
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Мала оголошення
Egestorf
1 572 km
Низькорамний причіп
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ваше оголошення було успішно видалено
Виникла помилка






























































