Причіп з робочою платформоюMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
Причіп з робочою платформою
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
фіксована ціна додається ПДВ
33 500 EUR
(39 865 EUR брутто)
рік випуску
2023
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
33 500 EUR
(39 865 EUR брутто)
- Місцезнаходження:
- Eichenstich 12, 21272 Egestorf, DE

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 14 200 кг
- Загальна вага:
- 19 000 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A104-33-237
- Референсний номер:
- 60281
- Оновлення:
- останній раз 25.06.2025
Опис
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
Tedpfx Afjl Tp Azsdsd
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
Tedpfx Afjl Tp Azsdsd
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка











































