Низькорамний причіпMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
Низькорамний причіп
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
фіксована ціна додається ПДВ
33 500 EUR
(39 865 EUR брутто)
рік випуску
2023
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
33 500 EUR
(39 865 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 14 200 кг
- Загальна вага:
- 19 000 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A104-33-225
- Референсний номер:
- 6028
- Оновлення:
- останній раз 10.07.2025
Опис
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Device in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the middle
* Steel rear wall can be pushed in between the ramps - holder for storage when not in use on the inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled with 2 ton lashing load every 480 mm
* Installation of 3 ton drop lashing rings every 600 mm possible
* Lashing package: in the corners at front and rear 1 x 10 ton UVV lashing each, on each side 2 x 8 ton UVV lashings retractable in the outer frame, various holes in head and end carrier for 1.2 ton lashing possibility
* One-piece mech. grid ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axel,s air reservoir, flange eye and landing gear painted in a black tone
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
Gsdpfol Tp Alox Agnjbw
* Tires: 235/75R17.5
* Painting of the board wall in RAL 9010 pure white
* Painting the side walls in another RAL color available at extra cost
* Vehicle has a day registration (without use)
* Errors and interim sale reserved,
* Immediately available from Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Device in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the middle
* Steel rear wall can be pushed in between the ramps - holder for storage when not in use on the inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled with 2 ton lashing load every 480 mm
* Installation of 3 ton drop lashing rings every 600 mm possible
* Lashing package: in the corners at front and rear 1 x 10 ton UVV lashing each, on each side 2 x 8 ton UVV lashings retractable in the outer frame, various holes in head and end carrier for 1.2 ton lashing possibility
* One-piece mech. grid ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axel,s air reservoir, flange eye and landing gear painted in a black tone
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
Gsdpfol Tp Alox Agnjbw
* Tires: 235/75R17.5
* Painting of the board wall in RAL 9010 pure white
* Painting the side walls in another RAL color available at extra cost
* Vehicle has a day registration (without use)
* Errors and interim sale reserved,
* Immediately available from Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка











































