Відкритий причіпMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Відкритий причіп
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
фіксована ціна додається ПДВ
32 650 EUR
(38 854 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
32 650 EUR
(38 854 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 10 500 кг
- Загальна вага:
- 14 400 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A104-27-108
- Референсний номер:
- 6285a
- Оновлення:
- останній раз 06.05.2026
Опис
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Height-adjustable drawbar by approx. 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
* Tire pressure monitoring with indication in the truck via EBS signal – no installation needed on the truck side
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions for retrofitting 20" container locks at front bulkhead and rear
* Bolted smooth sheet bulkhead
* Drop-side panels made of trapezoidal-profiled steel sheet, mid-split and foldable
* Steel rear wall insertable between ramp mounts, storage in the front interior when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t folding lashing brackets every 600 mm – 4 lashing rings mounted per side
* One 6.3 t lashing ring in each front and rear corner
* Profifix lashing rail along the longitudinal axis in the center, lashing capacity up to LC 3000 daN
* Various bores in the bulkhead and rear crossmember for 1.2 t lashing capacity
* One-piece mechanical grid ramps with spring system for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear drive-on slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flanged towing eye, and landing gear painted in black shade
* Sidewall color painted to desired RAL color (no special or metallic paint) – can be changed up to approx. 6 weeks before completion
* --Reinforced and certified bodywork to EN 12642 XL including load securing certificate--
Cedpfxol Th Dfs Ak Hsrb
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from approx. calendar week 31 / 2026
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Height-adjustable drawbar by approx. 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
* Tire pressure monitoring with indication in the truck via EBS signal – no installation needed on the truck side
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions for retrofitting 20" container locks at front bulkhead and rear
* Bolted smooth sheet bulkhead
* Drop-side panels made of trapezoidal-profiled steel sheet, mid-split and foldable
* Steel rear wall insertable between ramp mounts, storage in the front interior when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t folding lashing brackets every 600 mm – 4 lashing rings mounted per side
* One 6.3 t lashing ring in each front and rear corner
* Profifix lashing rail along the longitudinal axis in the center, lashing capacity up to LC 3000 daN
* Various bores in the bulkhead and rear crossmember for 1.2 t lashing capacity
* One-piece mechanical grid ramps with spring system for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear drive-on slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flanged towing eye, and landing gear painted in black shade
* Sidewall color painted to desired RAL color (no special or metallic paint) – can be changed up to approx. 6 weeks before completion
* --Reinforced and certified bodywork to EN 12642 XL including load securing certificate--
Cedpfxol Th Dfs Ak Hsrb
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from approx. calendar week 31 / 2026
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
175 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка

















































