Низькорамний причіпMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Низькорамний причіп
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
фіксована ціна додається ПДВ
31 900 EUR
(37 961 EUR брутто)
рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
31 900 EUR
(37 961 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Загальна вага:
- 14 400 кг
- Максимальна вага навантаження:
- 10 500 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A104-26-931
- Референсний номер:
- 6285
- оновлення:
- останній раз 10.07.2025
Опис
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
Nsdpfel Thvxex Aaljdc
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
Nsdpfel Thvxex Aaljdc
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
мала оголошення
Egestorf
1 572 km
Відкритий причіп
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ваше оголошення було успішно видалено
Виникла помилка

















































