Змінні шасі

Hangler LKW Tieflade Liftmaster Aufbau für 4 Achs LKW Fahrgestell zum Transport von Arbeitsbühnen

Additional information
Frame
Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim,
slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles,
steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with
wheelbase: 2nd axle 1,795 mm / 2nd to
3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm
Tow hitch
Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg,
including mounting and electrical system with 7-pole socket
Accessories/Modifications
2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck!
Steel underrun protection, quarter-shell fenders with mud flaps - These are
taken over from the truck!
Storage box
Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock
1 holder for 3 pieces of gasoline canisters
1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including
locking mechanism, contains control valve and electro-hydraulic
pump unit. Control box with all-round door seal and
sealing sleeves on the back
Electrical system
Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall
switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light,
at the rear, with integrated reversing camera including
color flat-screen monitor, screen with suction cup holder and power supply via 24 volts,
voltage divider 24/12V, 1 7-pole 12V socket = adapter
Floor
Mega Grip made of interlocking galvanized grating, steel grating 50/4 including
with a mesh size of 50 mm. Top side with anti-slip interlocking,
continuously laid over the entire main frame platform
Tie-down eyes
12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons.
1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the
Cjdpfok Unitjx Ag Degw
winch cable
12 tie-down eyes recessed in the center of the floor, each 5 tons.
Front wall
Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2
x 12 mounting brackets for lashing chains mounted on the left and right on the front wall
Winch
Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with
loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window,
with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m
control lever, acceptance of the winch, civil engineer's test report, test book, operating manual
Ramps
Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also
when loading with ramps), electro-hydraulically foldable and laterally adjustable - including
electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle
Ramp surface made of steel grating, hot-dip galvanized, with
anti-slip interlocking. Ramps can be slid together to approx. 170 mm,
ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity.
Ramp locking with 2 tension straps.
Ramp tip offset for resting on loading ramps.
Labeling of the ramp operation.
Lowering brake valve for lowering the ramp
Support
Adjustable support le

Оголошення було перекладено автоматично. Можливі помилки перекладу.