Бортовий / брезентовийFliegl
SDS 390 RoadRunner
Бортовий / брезентовий
Fliegl
SDS 390 RoadRunner
EXW фіксована ціна додається ПДВ
9 900 EUR
(11 781 EUR брутто)
Рік випуску
2015
Стан
Вживаний
Місцезнаходження
Triptis 

Зображення показують
Показати карту
Основні дані
- Позначення:
- Бортовий / брезентовий
- Виробник:
- Fliegl
- Модель:
- SDS 390 RoadRunner
- Номер транспортного засобу:
- WFDFLT33902017848
- Рік випуску:
- 2015
- Стан:
- вживаний
- Функціональність:
- повністю працездатний
Ціна та місцезнаходження
EXW фіксована ціна додається ПДВ
9 900 EUR
(11 781 EUR брутто)
- Місцезнаходження:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Зателефонувати
Технічні деталі
- Маса без навантаження:
- 6 537 кг
- Максимальна вага навантаження:
- 28 463 кг
- Загальна вага:
- 35 000 кг
- Конфігурація осей:
- 3 осі
- Перша реєстрація:
- 10/2015
- Довжина вантажного відсіку:
- 13 650 мм
- Ширина вантажного відсіку:
- 2 480 мм
- Висота вантажного відсіку:
- 2 790 мм
- Розмір шини:
- 385/65 r22.5
- Колір:
- сріблястий
Деталі пропозиції
- ID оголошення:
- A905-86-31
- Референсний номер:
- 37357
- Оновлення:
- останній раз 06.05.2025
Опис
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Kjdpfxjkyrmis Ab Aenf
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Kjdpfxjkyrmis Ab Aenf
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2006
Відправити запит
Телефон & Факс
+49 36482... оголошення
Ваше оголошення було успішно видалено
Виникла помилка










