Низьконавантажувач

MAX Trailer 4-Achs-Tele-Semi mit Rampen-nlla.

Gooseneck:
-Gooseneck with angled front corners at 45° and rear slope of approx. 750 mm x 10°
-3 pairs of lashing rings (LC 5,000 daN)
-Hardwood decking, 30 mm thick

Extendable platform:
-Extendable platform with rear slope of approx. 1,000 mm x 8°
-5 pairs of lashing rings, foldable outwards (LC 5,000 daN)
-3 pairs of lashing rings, foldable outwards (LC 10,000 daN)
-1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN)
-Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN)
-Hardwood decking, approx. 48 mm thick, with non-slip steel plate over the axles

Demountable two-piece ramps:
-One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with hardwood decking, approx. 48 mm thick
-Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable
-Maximum load per pair: 40,000 kg

Kingpin supports:
-JOST kingpin supports (mechanical) with 2-speed gearbox for 24-ton lifting capacity (50-ton test load)

Axles and tires:
-BPW axles, two fixed axles, two steered axles, air-suspended, with drum brakes, with lifting/lowering function
-The steered axles can be activated via an electro-magnetic reverse lock, either in reverse gear or manually
-Axle tool
-Tires 235/75 R 17.5

Braking system:
Lsdsh Etf Rjpfx Ah Tehn
-Braking system according to EU regulations with EBS-E (4S3M)

Steel structure:
-Steel structure made of high-strength fine-grain steels
-Steel grades:
-S355J2+N/S355MC (yield strength 355 MPa)
-S690QL/S700MC (yield strength 690 MPa)

Painting:
-First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer
-High-quality 2-component (2K) topcoat, single color in Nova Gray

Electrical system:
-Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
-ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets

Included accessories:
-2" kingpin
-One galvanized steel front panel, approx. 400 mm high
-One spare wheel with holder in front of the front panel
-Yellow-red air couplings on the galvanized connection strip at the front
-4 pieces of chocks with holder on the front panel
-Mounting in the rear area of the gooseneck for ALU ramp extensions
-Galvanized folding supports under the slope of the platform
-One bracket for a rotating beacon
-Cover plates to bridge the gap between ramps and platform
-White reflector tape according to EU regulations on the sides, on the extension and at the rear, red
-Electro-hydraulic unit
-One bracket for warning signs on the left and right sides of the gooseneck and ramps, including socket
-Control valves for the ramps mounted on the right side of the trailer
-One mud flap at the rear of the trailer
-Manual and description on a USB stick
-On the gooseneck, ALU side panels and rear panel can be plugged in, approx. 2,440 x 400 mm
-The rear galvanized locking bars are removable (length of the superstructure approx. 2,560 mm)
-4 pairs of WADER container pockets in the platform for a 20ft, 2x 20ft or a 40ft container
-7 pairs of pocket for locking bars 100 x 50 mm in the outer frame of the platform
-Extensions, galvanized, extendable by approx. 230 mm on each side
-Lift axle on the front axle with control
-Square ladder rails 20 x 20 mm
-Central lubrication system BEKAMAX
-Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm

Оголошення було перекладено автоматично. Можливі помилки перекладу.