Низький навантажувач

FAYMONVILLE MAX TRAILER MAX100 4A 8.60 U

Low loader semitrailer MAX100 4 A 8.60 U

Technical data
Speed 80 km/h
Total weight 60,800 kg
Fifth wheel load 18,000 kg
Axle load 42,800 kg
Unladen weight
Payload
Gooseneck length 3 850 mm
Saddle height loaded 1 250 mm
Loading area length 8 600 mm
Extendable by 5 400 mm
Center distance 1 360 mm
Rear steering radius 2 300 mm
Loading height with max. load 860 mm
Overall width 2 540 mm
Suspension travel -55/+145 mm

Technical description
Gooseneck
With beveled corners at the front 45° and with rear bevel of approx. 760 mm x 10°
3 pairs of lashing rings (LC 5 000 daN)
Hardwood decking 30 mm thick
Loading area in extendable design
with rear bevel of approx. 1 000 mm x 8°
5 pairs of lashing rings can be folded outwards (LC 5 000 daN)
3 pairs of lashing rings can be folded outwards (LC 10 000 daN)
1 pair of lashing rings lying in the front of the cargo bed (LC 10 000)
Hardwood flooring approx. 48 mm thick, checker plate over the axles
Ramps
Two-part steel ramps
A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood decking
Ramp with hydraulic folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable.
Byndvvrckx
Maximum load per pair 40,000 kg
Tires
235/75 R 17.5
Brake system in accordance with EU regulations with EBS-E (4S3M)
Without connecting lines to the tractor unit
Paint finish
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer
a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice
Rear section metallized and painted in RAL 9010 (pure white).
Seat posts:
JOST seat posts (mechanical) with 2-speed gearbox for 24t
Lifting load (50t test load)
Steel construction made of high-strength fine-grained steels.
Steel qualities:
Steel construction made of high-strength fine-grained steel
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Electrical system in accordance with EU regulations, lighting LED 24
Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets.
Connection according to ISO.
24N IS0-1185
24S IS0-3731
15 pole IS0-12098
Accessories included:
One galvanized steel end wall approx. 400 mm high.
2" kingpin
4 pieces of stop blocks with holder on the front wall.
A bracket for a rotating beacon at the rear of the trailer.
SAF axles, two rigid axles, one self-steering axle, air-sprung, with drum brake, with lifting/lowering function.
The self-steering axle with electro-magnetic reverse lock can be activated via reverse gear or manually.
Axle tool.
Mounting in the rear area of the gooseneck for ALU docking lights.
Galvanized folding supports under the bevel of the cargo bed.
Mechanical locking mechanism for the cargo bed.
One spare wheel with holder in front of the bulkhead.
Yellow reflective tape in accordance with EU regulations on the side, on the pull-out and at the rear
on the trailer.
Yellow-red air couplings on the galvanized connection strip at the front.
On the gooseneck and on the rear plate on the left and right, a holder for the warning signs including socket.
A mud flap at the rear of the trailer.
Manual and description
Plug-in ALU drop sides and rear wall approx. 2 440 x 400 mm (LX H) on the gooseneck.
The rear galvanized stanchions are removable.
Length of the body approx. 2 560 mm, +/- 46 kg
3 pairs of WADER container pockets in the loading area for a 20', 30' or 40' container (±

Оголошення було перекладено автоматично. Можливі помилки в перекладі.