Напівпричіп з робочою платформоюES-GE
3-Achs Sattelanhänger - Bordwände + CV
Напівпричіп з робочою платформою
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Стан
Новий
Місцезнаходження
Essen 

Основні дані
Ціна та місцезнаходження
- Місцезнаходження продавця:
- Heegstraße 6-8, 45356 Essen, Німеччина

Зателефонувати
Технічні деталі
Габарити та вага
Загальна вага:
43 000 кг
Максимальна вага навантаження:
35 440 кг
Осі та колеса
Конфігурація осей:
3 осі
Функції безпеки
ABS
Деталі пропозиції
- ID оголошення:
- A233-66-668
- Референсний номер:
- 36622
- Оновлення:
- останній раз 21.11.2026
Опис
You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
Kdsdpo Aldapofx Apyjw
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
Kdsdpo Aldapofx Apyjw
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2003
68 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 201 8... оголошення
Ці оголошення також можуть вас зацікавити.
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Essen
1 760 km
Напівпричіп з робочою платформою
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Essen
1 760 km
Напівпричіп з робочою платформою
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Essen
1 760 km
Напівпричіп з робочою платформою
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Ваше оголошення було успішно видалено
Виникла помилка



































