Низькорамний причіпMÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Низькорамний причіп
MÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Фіксована ціна додається ПДВ
29 250 EUR
(34 808 EUR брутто)
Стан
Новий
Місцезнаходження
Alsdorf 

Основні дані
Ціна та місцезнаходження
Фіксована ціна додається ПДВ
29 250 EUR
(34 808 EUR брутто)
- Місцезнаходження продавця:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Німеччина

Зателефонувати
Технічні деталі
Габарити та вага
Загальна вага:
14 400 кг
Максимальна вага навантаження:
10 880 кг
Довжина вантажного відсіку:
6 270 мм
Ширина вантажного відсіку:
2 470 мм
Висота вантажного відсіку:
400 мм
Осі та колеса
Конфігурація осей:
2 осі
Функції безпеки
ABS
Деталі пропозиції
- ID оголошення:
- A232-23-586
- Референсний номер:
- 11732
- Оновлення:
- останній раз 30.10.2026
Опис
* Müller Mitteltal ETÜ-TA-R 14.4 Low-loader, drive-over design with shortened side walls
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Rcedpo Af Dlcjfx Ammeh
Outside of opening hours, we are available by appointment
We speak German, we speak English, mowimy po polsku, on parle français.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Rcedpo Af Dlcjfx Ammeh
Outside of opening hours, we are available by appointment
We speak German, we speak English, mowimy po polsku, on parle français.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
23 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 2404 ... оголошення
Ваше оголошення було успішно видалено
Виникла помилка


























































