Вантажівка спеціального призначення

MAN TGS 35.520 8x4 Hydro, Kran Fassi F805 TECHNO

MAN TGS 35.510 - EURO 6, optionally with F905 incl. L436 Fly-Jib and V20 winch!!!
Tipmatik - Automatic transmission

8x4 Hydrodrive
Three steered axles
STEERING / LIFT axle

Front outriggers approx. 14,000 KG

Flatbed body with sideboards
6200x2550x600 mm

Step plates
Diamond plate flooring
Removable sideboards
9 x LED lights
Overwidth markings extendable to 3500 mm width
Start/Stop
Rotating beacon
8 x rung pockets
6 x lashing points 6500daN
Toolboxes
Trailer hitch
Storage compartments
Storage boxes
20 ft container locking
Perforated side profile lashing points 2500daN

Crane: FASSI F905R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main arm, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross - radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, foldable roller, quick coupling between main arm and Fly Jib and more... TECHNO series!! NEW crane model

Slew range endless
All hydraulic cylinders double-acting
Piston rods hard chrome plated
Double knee lever system with PROLINK (over-extendable boom up to 10°)
Electronic overload shut-off device with FX800
FASSI stability control FSC-S/2 incl. LMB II
Emergency stop, as well as optical alarm (90% and 100%)
Lhedpfj Ad Swkox Ah Tjn
Pressure relief and load holding valves
XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift)
RCH or RCS radio remote control with linear levers and display of
pressure range (in bar and %) and 90% + 100% warning in the display
Danfoss D900 control unit with 4 control valves mounted on the crane column
Emergency control for crane operation
High-pressure filter is supplied pre-assembled
sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base
hydraulic outriggers, on both sides hydraulically extendable, outrigger width 10.00m,
outriggers operable via radio
Standard color RAL 3020 traffic red - all cylinders painted black
IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control
Load hook and connecting lugs (short/500mm)
Driving position: folded across the direction of travel
Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V"

FASSI stability control FSC-TECHNO
Fassi V7S radio maxi - 8 linear levers
Proportional control unit » for the outriggers
180° hydraulically swiveling support legs / » on both sides
Preparation for operation with variable pump » (LS)
Control system for 2 additional functions with » 2 hose connections / hxp-techno
Additional boom (Jib) L436, 6-fold » hydraulically extendable
Jib Double Power (JDP)
Multi-coupling with cable duct » for Jib mounted for 2 functions
Control system for additional function » rope winch
Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical
Permanently mounted rope guide for operation with additional boom (Jib)
AWC - (Automatic winch Control) for crane » Automatic winch control
AWC - (Automatic winch Control) for JIB » Automatic winch control
Work light operable via display or radio
1 LED work light mounted on the boom »
1 LED work light mounted on the Jib »
LED for 2 outriggers, not mounted » (crane)
LED for 2 outriggers, not mounted » (additional support beam)
Electric rotary distributor with 14 » slip contacts
1 zinc primer from 720RA to F820RA
"Zinc primer for JIB ""L42"""
Extra charge for Dinitrol application (cavities)
Extra charge for stainless steel screws and stainless stee

Оголошення було перекладено автоматично. Можливі помилки перекладу.