Мініекскаватор + самоскид + віброплита + трамбовщик

Berger Kraus BK1350JSR Komplettpaket *KUBOTA*

With us, you will find reliable and solidly constructed mini excavators with numerous extras and a stylish design, as well as matching trailers and construction machinery, so you are prepared for every job!

Included in the offer: Mini excavator, 2-axle tipping trailer, vibrating plate, rammer, loading ramps, and a large accessory package!

Our equipment is sold as demonstration units, as loading and unloading for transport to our location, as well as short test drives, may result in the machines having up to a maximum of 5 operating hours.

With every excavator you purchase from us, you will receive a CE certificate, an invoice with VAT shown, and a German-language operating and repair manual.

Furthermore, we naturally offer financing for businesses, spare parts procurement, and excellent service!

Technical data of the excavator:
-BK1350JSR JOYSTICK, swing arm, and adjustable undercarriage
-Berger Kraus
-Operating weight: 1295 kg
-Engine: KUBOTA EURO 5 (D722) 3-cylinder, liquid-cooled (diesel)
-Rated power: 10.2 kW (14 hp) / 2500 rpm
-Displacement: 719 cm³
-Main pump: TAIFENG piston pump
-Oil flow: 45 L/min
-Swing motor: EATON (USA)
-Travel motor: JINGKEN hydraulic motor
Hfedpjz Stkcjfx Alden
-2 travel speeds: 2 / 3.6 km/h
-Hydraulic oil tank: 15.3 L
-Fuel tank: 11 L

Working ranges of the mini excavator:
-Digging reach on the ground: approx. 3380 mm
-Max. digging reach: approx. 3410 mm
-Max. digging depth: approx. 2002 mm
-Max. digging height: approx. 2980 mm
-Max. dump height: approx. 2170 mm
-Minimum turning radius: approx. 1490 mm
-Max. blade lift height: approx. 140 mm
-Max. blade digging depth: approx. 200 mm
-Swing radius: 360°

Dimensions of the mini excavator:
-Total chain length: approx. 1435 mm
-Undercarriage width: approx. 850-1000 mm, adjustable undercarriage
-Track width: approx. 180 mm
-Track height: 320 mm
-Overall dimensions (L x W x H): 3100 x 850(1000) x 2320

Technical data of the vibrating plate:
-Baumax VP25/50 incl. maintenance kit
-Working height: 640 mm
-Operating weight: 130 kg
-Base plate size: 490 x 590 mm
-Displacement: 196 cm³
-Handle height: 950 mm (adjustable)
-Fuel: gasoline
-Engine: 1-cylinder, 4-stroke OHV
-Centrifugal force: 25 kN

Technical data of the rammer:
-Model: Baumax GS72-XL
-Weight (kg): 76 kg
-Stroke on the rammer plate: 75 mm
-Fuel: gasoline
-Power: 3.2 kW (4.35 hp)
-Dimensions rammer foot (L x W x H mm): 340 x 290 mm
-Overall dimensions L x W x H: 700 x 345 x 1010 mm
-Engine: 1-cylinder, 4-stroke OHV
-Impact rate: 700 1/min
-Compaction pressure: 14 kN

Technical data of the tipping trailer:
-Martz rear-tipping trailer 250/2
-Total weight: 2000 kg
-Payload: 1527 kg
-Unladen weight: 473 kg
-Dimensions of the loading area L x W: 2530 x 1520 mm
-Overall dimensions L x W x H: 3910 x 1640 x 1100 mm
-Side board height: 300 mm
-Aluminum floor
-Hand tipping pump

Technical data of the loading ramps:
-Load capacity per pair: 2000 kg
-Aluminum
-Length: 2500 mm
-Width: 400 mm
-Height: 90 mm
-Weight per ramp approx. 19 kg
-CE mark

Accessory package:
-Vibrating plate
-Rammer
-Quick coupler (pre-assembled)
-Hydraulic excavator thumb (pre-assembled)
-Hydraulic ditching bucket, width 800 mm
-Hydraulic hammer
-Sieve bucket 800 mm
-Bucket 200 mm
-Bucket 380 mm
-Bucket 600 mm
-Stone grapple
-Ripper tooth
-Rake
-Earth auger, 20 cm diameter
-Toolbox

As a licensed Berger Kraus and Martz partner, we are your contact for spare parts or additional accessories, as well as for any questions or suggestions regarding your new equipmen

Оголошення було перекладено автоматично. Можливі помилки перекладу.