Напівпричіп з робочою платформою

KÖGEL 3-Achs-Sattelanhänher Multi Chassis

You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis
10110.122 Regular ladder frame in lightweight steel construction with through-bolted crossmembers.
10115.010 With overhang of the chassis frame.
10300.108 Fifth wheel coupling plate, approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337.

Suspension
I 17160.010 Axle lift mechanism on axle 1.
I 17165.103 Axle lift control, fully automatic, load-dependent.
Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h.
I 17170.010 Operation on the chassis via a switch. Also possible from the cab (switch in the cab required - PIN 12).
18330.700 Manufacturer of your choice Kögel - Three-axle unit, with disc brakes Ø approx. 430 mm, insertion depth approx. 120 mm.
Air suspension with approx. 180 mm travel.

Vehicle Tires
L20520.010 Wheels with internal sensors according to UN ECE R141.
20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J)

Dwodez N Nxdjpfx Abljc
Chassis Components
20110.010 Fifth wheel supports (manufacturer of your choice from Kögel), mechanical with leveling foot, 24 t lifting capacity. Single-sided operation on the right side when driving.
I 21070.117 Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles.
22070.013 Side protection device according to ECE-R73.
I 25620.102 2 plastic toolboxes, waterproof, dimensions (internal) approx. 525 x 390 x 410 mm. Installation at the rear, 1x left and 1x right.
27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58.
I 71800.020 1 pair of extendable warning panels (approx. 280x280mm) for overwidth loads, retroreflective red / white, with LED lighting, spiral cable and plug connection.

Brake / Air Suspension System
32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection.
I 32125.015 WABCO EBS system
33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Driving position is automatically set.
34320.001 2 fail-safe coupling heads at the front ISO 1728
34410.010 Air tanks for brake system and air reserve made of steel (EN 286-2).

Floor
40510.120 Flat floor, approx. 30 mm thick
I 40513.020 Floor caulked around the entire perimeter
I 40542.023 Pockets for square tube inserts approx. 80 x 80, arrangement according to drawing J9: 8 pieces of pocket rail strips (18 pocket recesses per strip: 4 pieces each on the outside + 10 pieces in the middle).

Front Wall
I 40532.260 Storage for max. 20 square tube inserts 80 x 80 (length 1,990 mm) on the inside of the front wall.
I 41710.201 Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, screwed / riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front end panel according to EN 12640.

Side Wall
43540.380 Va

Оголошення було перекладено автоматично. Можливі помилки перекладу.