Технологія годуванняSiloking
Selfline Premium 20cbm
Технологія годування
Siloking
Selfline Premium 20cbm
Рік випуску
2012
Стан
Вживаний
Місцезнаходження
Pragsdorf 

Основні дані
- Позначення:
- Технологія годування
- Виробник:
- Siloking
- Модель:
- Selfline Premium 20cbm
- Рік випуску:
- 2012
- Стан:
- вживаний
- Напрацювання годин:
- 7 360 h
Ціна та місцезнаходження
- Місцезнаходження продавця:
- Neubrandenburger Strasse 28a, 17094 Pragsdorf, Німеччина

Зателефонувати
Деталі пропозиції
- ID оголошення:
- A227-69-040
- Референсний номер:
- 20843-491903210036
- Оновлення:
- останній раз 17.09.2026
Опис
Operating hours: 7360, chipping mill, weighing system, vertical mixer, discharge on both sides, self-propelled.
• 7358 operating hours
• Hopper volume 20 cbm
Hodpfxjz A Npuj Abaent
• Hydrostatic drive
• One discharge slide each on the rear left and right with chain conveyor
• 40 km/h version with wide chassis and rear axle steering
• Permissible total weight 16000 kg
• Mineral feed hopper with hydraulic feed
• Hydraulic counter-cutting blades
• Weighing system
• Camera system with two cameras each at the rear and one in the mixing container
• One rotating beacon at the front and rear
• Additional rear lights at the top rear of the mixing container
• 6 work spotlights at the front
• 2 work spotlights on the side
• 2 work spotlights at the rear
Approximately 3 years ago, almost €55,000 was invested in the machine:
• New high-performance chipping mill
• Mixing augers and container reinforced
• Container repainted
• New slides
• Many oil hoses replaced
Recently, the following repairs were carried out:
• New knives installed
• Wear plates welded into the chipping mill
• Slides reinforced
• New radiator, new expansion tank, and new radiator hoses
Dimensions:
Length: approx. 9750 mm
Width: approx. 2300 mm
Height: approx. 2850 mm
Storage location: Customer
Оголошення було перекладено автоматично. Можливі помилки перекладу.
• 7358 operating hours
• Hopper volume 20 cbm
Hodpfxjz A Npuj Abaent
• Hydrostatic drive
• One discharge slide each on the rear left and right with chain conveyor
• 40 km/h version with wide chassis and rear axle steering
• Permissible total weight 16000 kg
• Mineral feed hopper with hydraulic feed
• Hydraulic counter-cutting blades
• Weighing system
• Camera system with two cameras each at the rear and one in the mixing container
• One rotating beacon at the front and rear
• Additional rear lights at the top rear of the mixing container
• 6 work spotlights at the front
• 2 work spotlights on the side
• 2 work spotlights at the rear
Approximately 3 years ago, almost €55,000 was invested in the machine:
• New high-performance chipping mill
• Mixing augers and container reinforced
• Container repainted
• New slides
• Many oil hoses replaced
Recently, the following repairs were carried out:
• New knives installed
• Wear plates welded into the chipping mill
• Slides reinforced
• New radiator, new expansion tank, and new radiator hoses
Dimensions:
Length: approx. 9750 mm
Width: approx. 2300 mm
Height: approx. 2850 mm
Storage location: Customer
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Востаннє онлайн: минулого тижня
Зареєстровано з: 2005
1 150 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 3966 ... оголошення
Ваше оголошення було успішно видалено
Виникла помилка






























