Відкритий напівпричіп з тентом

WIELTON Curtain Master Standard NS3KM4*SAF*LiftA

Chassis / Frame
Frame as a double longitudinal beam with cross members and outer frame welded together
Welded structure made of high-quality S700 steel in a weight-optimized design
Perforated outer frame with continuous lashing points for securing the load
SAFETY LOCK system, 60 holes per side for load securing
Holes and edges protected with rubber pads
Working area according to ISO 1726:2003

Axles and Suspension
3 axles, each with a load-bearing capacity of 9,000 kg
SAF axles with air suspension and disc brakes (ET120)
Brake discs with Durchesser 430 mm
2" kingpin (corner dimension 2040 mm)
2 mechanical landing gears, manufacturer SAF
Single-sided landing gear operation, right side
1st axle as a lift axle

Fgodpfjzz E Awjx Aqpeg
Wheels and Tires
Tire size 6 x 385/65 R 22.5
6 x steel rims (11.75x22.5) ET 120
Tread depths:
3/6 mm
11/13 mm
11/12 mm

Braking System
Braking system according to ECE directive
Dual-circuit compressed air braking system, manufacturer WABCO, ADR-compliant
EBS system, WABCO System 2S/2M
Lifting and lowering device
Brake line connections at the front, in front of the front wall
Standard air connections according to ISO
Air reservoirs for braking system and compressed air reserve made of aluminum

Floor
30 mm thick, multi-layered, glued, non-slip and waterproof screen-printed plywood floor, sealed at the cut edges
Floor sealing around the entire perimeter
Pallet stop rail on both sides

Superstructure
Superstructure strength according to EN 12642 XL (VDI12700)
Front wall impact protection, inner side plywood, 1500 mm high
3 pairs of center posts (each with 5 slat pockets)
Aluminum corner posts screwed on
4 rows of aluminum slats (100 mm)
1 row of aluminum slats on the floor (150 mm)
Tarpaulin tensioning device at the rear as a ratchet, each at the rear right and left
Release mechanism for side tarpaulin by means of a linkage lever, each at the front right and left
Front wall made of aluminum according to VDI-DIN EN 12642 XL (pressure 13,500 daN)
2 side sliding tarpaulins according to VDI/DIN EN 12642 XL (pressure 10,800 daN)
with 18 tarpaulin tensioners on the side, tarpaulin material quality approx. 900 g/m²
Rear wall as a two-wing portal door made of aluminum with double swivel locking mechanisms
per door leaf according to VDI/DIN EN 12642 XL (pressure 8,100 daN)
Roof as a sliding tarpaulin, manufacturer Edscha HYBRYD, can be shifted on both sides
Diagonal bracing in the middle with plastic-coated steel cables between the roof tarpaulin and
crossbars

Upon request, customs license plates and insurance can be provided for an extra charge! For export business, we can carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.

For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe!

Always make an appointment for inspection / test drive! Just take a look at us. We are looking forward to your visit.

Disclaimer: The information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics.

Оголошення було перекладено автоматично. Можливі помилки перекладу.