Низькорамний напівпричіп

FLIEGL SDS410 Tieflader Gardine Jumbo Plane Lenkachse

Fliegl SDS410 Low-Bed Trailer with Curtain and Jumbo Extension for Forklift Transport
1st axle: Lift axle / 3rd axle: Steerable trailing axle / SAF drum brake axles
Loading ramp / EcoLift - Lifting roof / Rear bumper extension

Permissible total weight: 39,000 kg,

Unladen weight: 11,500 kg,

Payload: 27,500 kg,

Saddle height unladen: approx. 1,185 mm,

SAF axles,

1st axle: Lift axle,

3rd axle: Steerable trailing axle,
(with automatic reverse lock via reversing light and additional locking function,
on the vehicle via hand button)

Air suspension,

Drum brakes,

HALDEX braking system,

Edscha tarpaulin,

EcoLift - Lifting roof, can be raised approx. 380 mm, on both sides, with gas spring support,

Rear bumper extension mechanically by 400 mm each for loading and unloading,

Welded-on strap plane - sliding tarpaulin,

Underrun protection left, right, and rear,

2x crank supports at the front,

2x drop supports at the rear,

2x LED reversing lights at the rear,

2x storage box on the left,

1x storage box on the right,

Air connection coupling head (red + yellow),

2x 7-pin,

ABS,

EBS,

ALB,

Nwodpfx Amezwaf Ssgek
Tie-down rail in the center,

Loading ramps with diamond plate and grid plate,

Overwidth signs at the front and rear,

9x tie-down points + 7x tie-down holes per side on the low bed,

4x tie-down points + 2x tie-down holes per side on the gooseneck,

Wheelbase: 6,450 + 1,330 + 1,800 mm,

External dimensions: 14,100 x 2,550 x 4,000 mm,

Spare wheel holder incl. spare wheel,

Tires: 235/75R17.5 on steel rims,

Tire tread depth left front outside: 8 mm,

Tire tread depth left front inside: 8 mm,

Tire tread depth left center outside: 7 mm,

Tire tread depth left center inside: 8 mm,

Tire tread depth left rear outside: 7 mm,

Tire tread depth left rear inside: 11 mm,

Tire tread depth right front outside: 8 mm,

Tire tread depth right front inside: 7 mm,

Tire tread depth right center outside: 8 mm,

Tire tread depth right center inside: 7 mm,

Tire tread depth right rear outside: 7 mm,

Tire tread depth right rear inside: 7 mm,

Further equipment:
Overall length approx.: 13,800 mm,
Overall width max.: 2,550 mm,
Overall height approx.: 4,000 / 4,040 mm,
Gooseneck length approx.: 4,050 mm,
Internal length of low bed incl. rear slope approx.: 9,500 mm,
Internal width approx.: 2,480 mm,
Side loading height of low bed approx.: 3,000 mm,
Internal height of gooseneck approx.: 2,590 mm,
Loading height in the low bed approx.: 920 mm,
Saddle height approx.: 1,200 mm,
Front corner dimension approx.: 2,040 mm,
Jumbo semi-trailer chassis:
for construction machinery transport up to 32,000 kg,
Ramp well closed at the top with steel / diamond plate,
Rear support foldable,
Aluminum side impact protection,
Spare wheel holder for 1 spare wheel, with wheel fastening set,
Omega rail in the low bed laterally at the bottom on the outer frame,
Tie-down eyes on the gooseneck:
4 pairs of 5-ton tie-down eyes embedded in the outer frame,
2 pairs of tie-down loops embedded at the top and side in the outer frame,
Low bed:
8 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons,
9 pairs of 5 tons embedded in the outer frame,
Row / line of hole tie-down rails embedded along the floor on the gooseneck and in the low bed (from the end
of the front cross member to the beginning of the rear cross member),
Axles + suspension:
SAF drum brake axles,
Last axle steerable trailing axle, with automatic reverse lock via reversing light and additional locking

Оголошення було перекладено автоматично. Можливі помилки перекладу.