Зимове обслуговування, тип Küpper-Weisser

Küpper-Weisser Streumaschine

Küpper-Weisser spreading machine, type: IMS2F E29050DFA
Hopper made of stainless steel, painted RAL 2011 orange, hopper volume 5.0 m³,
hopper length 2,900 mm, particularly stable hopper construction, control unit in the control cabinet, wiring for 1 rotating beacon,
with holder + connecting pipe on the spreading machine, ON/OFF switching is done at the Vpad, work light (LED version),
dosing flap, cover wedge in polished stainless steel, control cabinet in stainless steel, spreading pattern distributor Optiwet (without spreading disc)
IMS-E frame in duplex steel, RAL 7016 in combination with 12 t Roll-tec in duplex design, hopper length 2,900 mm, PLF assembly (platform, ladder, conveying auger)
consisting of:
platform with handrail in stainless steel, intermediate pipe in stainless steel, safety access ladder in stainless steel for mounting height 1,320 to 1,730 mm,
Hsdpfx Aozc E Svsmmjw
conveying auger in steel (design depends on hopper length and intermediate pipe), PLF for hopper length 2,900 mm
with additional length of 600 mm and intermediate pipe,
protective grid with mesh size 70 x 70 mm in the solid material hopper, duplex design for hopper length 2,900 mm,
console for spreading pattern distributor OptiWet, holder for mounting OptiWet
spreading disc for spreading width 2-10m (D = 680 mm)
smooth cone for gentle flow of the spreading material into the disc wing, spreading disc rising outwards for concentrating the spreading material
balanced, made of rust-resistant stainless steel V2A
remote adjustment of the spreading pattern
from the cab with position display in the Vpad display, adjustment by means of a linear actuator of the entire spreading pattern distributor
for spreading in parking bays, junctions, etc., protection of the surrounding greenery, savings of spreading material through targeted and edge-precise spreading
replaces the standard manual adjustment
Automatic spreading pattern adjustment ASN®
In combination with OptiWet spreading pattern distributor with GSN® and ASBS®
Speed-dependent spreading pattern adjustment
Automatic spreading width stabilization with speed-dependent
spreading disc speed adjustment
Spreading pattern adjustment 24 Volt
Spreading machine control unit Vpad 2F
7" color monitor with touchscreen for machine functions
with automatic and manual contrast/brightness adjustment
can be used as a reversing camera via the existing connection socket
voice feedback of the setting made, display of the spreading range based on the remaining
spreading material
key switch as a main switch ON-OFF
standard SD card slot for manual data transfer
integrated radio technology module (equipment on the spreading machine side is available)
Plug connections standard:
1x LAN + 3x USB + 2x CAN-BUS
1x analog camera
1x drive signal for route-dependent control
1x output for additional loudspeaker
1x internal for Vpad joystick and
front-mounted equipment control
1x internal for joystick II, e.g. side snowplow control
including display of operating data, for daily,
seasonal and total counters
RS-232 interface for outputting data protocol in accordance with DIN EN 15430-1
Analog reversing camera system
consisting of reversing camera with cable set and separate cable separation. The 7" display of the Vpad2F is used as the monitor.

and much more...

Sale of the complete package with snowplow and mounting plate possible. Inquiries for trucks are also welcome!

Оголошення було перекладено автоматично. Можливі помилки перекладу.