Причіп з робочою платформоюMÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
Причіп з робочою платформою
MÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
фіксована ціна додається ПДВ
33 900 EUR
(40 341 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Alsdorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
33 900 EUR
(40 341 EUR брутто)
- Місцезнаходження продавця:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 16 500 кг
- Загальна вага:
- 21 000 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Обладнання:
- ABS, задній підйомник
Деталі пропозиції
- ID оголошення:
- A215-48-223
- Референсний номер:
- 11630
- Оновлення:
- останній раз 20.03.2026
Опис
Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader | Drive-over Platform Trailer
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
Isdeyvxg Uepfx Ag Netd
We speak German, English, Russian, Polish, and French
* WhatsApp
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
Isdeyvxg Uepfx Ag Netd
We speak German, English, Russian, Polish, and French
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
24 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 2404 ... оголошення
Ваше оголошення було успішно видалено
Виникла помилка




























