Низькорамний напівпричіп

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader

You can find our complete range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment list. Full specifications available on request.

Gooseneck:
* Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°)
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading area:
* Extendable loading platform with rear bevel (approx. 1,000 mm x 8°)
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface

Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load)

Tyres:
* 235/75 R 17.5 3PMSF tyres, brand at our discretion

Axles:
* BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function
* Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually)
* Axle tools

Brake system:
* WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit

Steel structure:
* Steel construction from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa)

Electrical system:
* Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098)

Paintwork:
* Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims in silver

Accessories:
* Spare wheel holder in front of the bulkhead (without spare wheel)
* 2 inch kingpin
* Galvanized steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection bar
* Receptacle at the rear of the gooseneck for ALU loading ramps
* Galvanized drop-down supports under the loading area bevel
* Bracket for a revolving beacon at the rear of the trailer
* Brackets left and right on the gooseneck and rear plate for warning signs including socket
* TPMS tire pressure monitoring system compliant with ECE R 141
* Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm)
Iedpfoyvnfgox Ag Nehw
* Galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container
* Sliding hook-in rails for ALU loading ramps at the rear of the vehicle
* 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area
* Galvanized extensions, extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control based on current axle load and load status
* 2 LED reversing lights mounted on the rear plate
* 2 pairs of ferry-

Оголошення було перекладено автоматично. Можливі помилки перекладу.