Гнойова технологія

Wienhoff 20.300 TW PROFI LINE

20.300 TW PROFI LINE
(0010) Wienhoff 20.300 TW PROFI LINE
(0011) Factory No.: 2497
(0020) Slurry tanker with internal coating and
(0030) external paint finish.
(0040) 6.20 m cylinder,
(0050) 6 mm wall thickness, 2.00 m tank diameter, 3
(0060) welded baffle plates inside the tank and
(0070) manhole cover aligned with the rear
(0080) cover.
(0090) Tank with liquid displacement system
(0100) for optimum drawbar load distribution.
(0110) Color: RAL 6002 (Leaf Green).
(0120) Simple tank ventilation and venting system with
(0130) galvanized pipe routed through the tank.
(0140) E-hydraulics - second tank filling and
(0150) venting at the rear for FV.
(0160) Fill level indicator with 150 mm sight glass
(0170) at the front of the tank.
(0180) Fill level float indicator front of tank for CAN bus (diameter in mm missing)
(0200) 8" suction port reduced to 6" with hydraulic
(0210) slide valve and quick coupler
(0) Quick coupler with ball valve at the front left
(0230) 6" mechanical slide valve with quick coupler
Nsdpfx Ajyhr Nxja Djcp
(0240) (direct in the tank for suction extraction).
(0250) 14 t Gigant air suspension, tandem axle,
(0260) forced steering with cable, 150 BPW axles,
(0270) Track width 2225 mm.
(0280) Low center of gravity: axles mounted above the
(0290) springs, wheel arches over both axles.
(0300) Wienhoff "L&S" Safety Plus for
(0310) tandem:
(0320) - automatic adaptation of the air suspension pressure
(0330) to load distribution
(0340) - Driving Stability Program (RSP)
(0350) - ABS System
(0360) - Drawbar load sensor
(0370) Wheels: 800/60 R 32 Vredestein Fl. Trac
(0380) Hydro-pneumatic suspended drawbar hitch
(0390) K80 with hydraulic support leg K80 with large
(0400) flange (4 t).
(0410) Dual-circuit air brake system with ALB
(0420) 40 km/h equipment with galvanized mudguards:
(0430) Galvanized mudguards with round steel edge,
(0440) Warning signs + marker lights
(0450) Rear underrun protection with truck lighting
(0460) 40 km/h TÜV certificate
(0470) Additional lighting at the top of the tank, as LED
(0480) version.
(0490) LED work lights, 2 pieces,
(0500) Position:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x at the suction arm
(0540) Active marker lights instead of
(0550) retroreflectors on the vehicle side, LED.
(0560) Large stone trap with door opening
(0570) and prepared for the RotaCut M
(0580) 10 Vogelsang rotary lobe pump VX 186/390Q - L/min
(0610) Injection system with hydrostat
(0620) hydraulically controlled rotary lobe pump via
rpm.
(0640) PTO shaft,
(0650) - Gearbox
(0660) - Hydrostatic pump
(0670) - Controlled oil cooler & oil tank
(0680) Drain cocks on both pump suction and
(0690) pressure sides.
(0700) Wienhoff fill turbine 8 inch type 30
(0710) for docking arm.
(0720) With valve for E-hydraulics.
(0730) Monitoring unit on pressure side
(0740) Pressure gauge (manometer) on the pressure side with
(0750) diaphragm gauge
(0760) Monitoring unit on suction side
(0770) Vacuum gauge on the suction side
(0780) with diaphragm gauge.
(0790) With 8" inspection flap.
(0800) 2" overpressure valve at the vacuum
(0810) gauge.
(0820) PRESSURE FILTER BEFORE THE CONTROL BLOCK!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux variant 6 / suction / docking arm
(0850) all / boom / application / headland / 2-axle joystick.
(0870) Auxiliary control box for suction slide valve
(0880) bottom left and right.
(0890) Auxiliary control box for lift gear up/down
(0900) rear left.
(0920) Prepared for Wienhoff N-sensor
(0930) Hydraulic pipes instead of hoses

Оголошення було перекладено автоматично. Можливі помилки перекладу.