низькорамний напівпричіп

Faymonville MAX Trailer 4-A-Tele-Semi-Rampen-zwangsg

With every used semitrailer, you receive a current and comprehensive inspection and function report.

Gooseneck:
- Gooseneck with rear chamfer of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring

Extendable load platform:
- Load platform in extendable design with rear chamfer approx. 1,000 mm x 8°
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 3 pairs of fold-out lashing rings (LC 10,000 daN)
- 1 pair of flat-mounted lashing rings at the front of the platform (LC 10,000 daN)
- Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring; checker plate over the axles

Axles and tyres:
- BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension with lift and lowering valve
- Tyres: 245/70 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141

Two-piece steel ramps:
Ppedpfx Ameyffd Dj Ier
- One pair of galvanised two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load capacity per pair: 40,000 kg

Accessories included:
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings at the galvanised connection rail at the front
- 4 wheel chocks
- One spare wheel
- Electro-hydraulic power unit
- Remote steering from the front and rear using wired remote control with push buttons, with single-track axle control
- Mount at the rear section of the gooseneck for aluminium drive-on ramps
- European reflective panels (Red-Yellow) at the rear of the semitrailer
- White reflective tape as per EU regulations on sides, on extension, and red at the rear
- On the gooseneck and ramps, left and right, each with a bracket for warning signs and socket
- One holder for a beacon at the rear of the semitrailer
- Galvanised folding supports under the chamfered section of the platform
- Control valves for the ramps mounted on the right side of the semitrailer
- Cover plates to bridge the gap between ramps and platform
- Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2
- On the gooseneck, clip-on aluminium drop sides and rear wall, approx. 2,440 x 400 mm
- Rear galvanised plug-in posts are removable (structure length approx. 2,560 mm)
- One INOX toolbox 1,350 x 400 x 400 mm mounted on the gooseneck, box covers oil filler plug
- 4 pairs of WADER container pockets on platform for one 20ft, two 20ft, 40ft or 45ft container
- 7 pairs of stake pockets for removable posts 100 x 50 mm on the outer frame of the platform
- Galvanised extensions, extendable by approx. 230 mm per side
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform’s chamfer
- Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with position light
- Radio remote control for steering in addition to the wired remote, with indicator lights on receiver for single-track control
- Non-slip sand coating painted on checker plate on the gooseneck and load platform
- 80 km/h speed stickers at the rear and on both sides

Оголошення було перекладено автоматично. Можливі помилки перекладу.