Низькорамний напівпричіп

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Our entire stock of vehicles, including those available immediately and at short notice, can be found on our website.

Excerpt from the specifications. Full list of equipment on request.

Gooseneck:
* Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Load Area:
* Telescopic loading area with rear chamfer approx. 1,000 mm x 8°
* 1 pair of fixed integrated wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, as well as widenings in the lower section
* Between 1st and 2nd axle, one pair of fixed integrated wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D)
* Recess in the chamfer and extending into the loading platform to accommodate the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm (L x W x H)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 5 pairs of outward folding lashing rings (LC 5,000 daN)
* 2 pairs of outward folding lashing rings (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
* Including 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t/each

Axles:
* BPW axles and suspension, 2 rigid axles, 3rd axle steering trailing axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock activated via reverse gear and manually
* Air suspension with lift/lower valve
* Axle tool

Tyres:
* Tyres 235/75 R 17.5 3PMSF

Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Brake System:
* Braking system as per EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel Construction:
* Steel structure made from high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Paintwork:
* Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer
* High-quality two-component (2K) top coat, single-colored in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)

Included Accessories:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Spare wheel bracket in front of the front wall
Ffsdpfx Adsyc Axyodjw
* On the galvanized connector rail at the front, yellow-red air couplings
* 4 wheel chocks with holder on the front wall
* Receptacle at rear of the gooseneck for aluminum loading ramps
* Galvanized folding supports below the rear chamfer of the loading area
* Bracket for a beacon at the rear of the trailer
* Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer
* On the gooseneck and rear panel, left and right, a bracket for warning signs including socket
* One mud flap at the rear of the trailer
* Manual and description on USB stick
* On the warning signs, bracket for beacons
* European reflective plates (red-yellow) at the rear of the trailer
* 80 km/h speed stickers at the rear and on both sides
* Load gauge for determining axle loads including load chart
* On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H)
* Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm)
* A tool ...

Оголошення було перекладено автоматично. Можливі помилки перекладу.