ПричіпMÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
Причіп
MÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
Фіксована ціна додається ПДВ
56 500 EUR
(67 235 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Основні дані
Ціна та місцезнаходження
Фіксована ціна додається ПДВ
56 500 EUR
(67 235 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
Габарити та вага
Загальна вага:
24 000 кг
Максимальна вага навантаження:
17 650 кг
Довжина вантажного відсіку:
9 230 мм
Ширина вантажного відсіку:
2 480 мм
Осі та колеса
Конфігурація осей:
3 осі
Деталі пропозиції
- ID оголошення:
- A208-17-152
- Референсний номер:
- 6306b
- Оновлення:
- останній раз 24.10.2026
Опис
* TP 30.0 with 3 cable reels
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring accumulators
* Drum brakes
----Axle:
* 3 x 11 ton Gigant axles
----Suspension:
* Air suspension 17.5" with lifting and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm drawbar eye
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation
* 15-pole power plug
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General components:
* Aluminum air reservoir
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Side impact protection
* Plastic quarter fender
* Underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing straps, lashing force per lashing point 2,000 kg at a distance of 480 mm
* Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of supply includes 12 pieces of 3,000 kg lashing brackets on each side
* 5 slots for tube supports 100 x 50 mm on each side in the outer frame - the supports are not included in the scope of supply
* 30 mm screen-printed floor
----Cable reel supports:
* 3 galvanized cable reel supports secured by container locks, with side forklift pockets, center to center 800 mm (width of the pockets 185 mm)
* Reel diameter max. 2,600 mm and reel width max. 1,800 mm
* Clear width between the support arms approx. 1,824 mm, with cross connection
* 6,000 kg reel weight per cable reel support
* Without drive and drum brake
* Support arm with clamping device for securing the reel shaft
* Steel reel shaft, 76 mm diameter, with centering and rotatable ends
* 2 spacing rings
* 2 centering cones made of polyamide
* 4 pieces of 3.2 ton lashing rings on the support arms for customer-side securing of the reel against rotation and unwinding
----Loading height:
* loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
Kdedjx Nlkaspfx Apyow
* Axles painted in a black tone
* TP 30.0 with 3 cable reels
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring accumulators
* Drum brakes
----Axle:
* 3 x 11 ton Gigant axles
----Suspension:
* Air suspension 17.5" with lifting and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm drawbar eye
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation
* 15-pole power plug
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General components:
* Aluminum air reservoir
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Side impact protection
* Plastic quarter fender
* Underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing straps, lashing force per lashing point 2,000 kg at a distance of 480 mm
* Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of supply includes 12 pieces of 3,000 kg lashing brackets on each side
* 5 slots for tube supports 100 x 50 mm on each side in the outer frame - the supports are not included in the scope of supply
* 30 mm screen-printed floor
----Cable reel supports:
* 3 galvanized cable reel supports secured by container locks, with side forklift pockets, center to center 800 mm (width of the pockets 185 mm)
* Reel diameter max. 2,600 mm and reel width max. 1,800 mm
* Clear width between the support arms approx. 1,824 mm, with cross connection
* 6,000 kg reel weight per cable reel support
* Without drive and drum brake
* Support arm with clamping device for securing the reel shaft
* Steel reel shaft, 76 mm diameter, with centering and rotatable ends
* 2 spacing rings
* 2 centering cones made of polyamide
* 4 pieces of 3.2 ton lashing rings on the support arms for customer-side securing of the reel against rotation and unwinding
----Loading height:
* loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
Kdedjx Nlkaspfx Apyow
* Axles painted in a black tone
* TP 30.0 with 3 cable reels
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
158 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Egestorf
1 572 km
Причіп з робочою платформою
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Egestorf
1 572 km
Причіп
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Ваше оголошення було успішно видалено
Виникла помилка




















































































