Низькорамний причіпMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
Низькорамний причіп
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
фіксована ціна додається ПДВ
42 500 EUR
(50 575 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
42 500 EUR
(50 575 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 23 830 кг
- Загальна вага:
- 30 000 кг
- Конфігурація осей:
- 3 осі
- Довжина вантажного відсіку:
- 8 460 мм
- Ширина вантажного відсіку:
- 2 520 мм
Деталі пропозиції
- ID оголошення:
- A207-87-217
- Референсний номер:
- 6316a
- Оновлення:
- останній раз 18.12.2025
Опис
* T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 ton BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic fenders; rear axle: straight, galvanized steel mudguards, each fitted with spray protection
* Reflective contour marking tapes at the sides and rear
* Folding lid (hot-dip galvanized) for the toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin power socket
* 4 stake pockets each side (stakes not included), also suitable for load securing
* Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, foldable and lowerable, loadable from all directions and embedded in the outer frame – corner rings 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper)
* Widening planks stored in middle of loading area
* Digger arm storage from rear axle to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the digger arm storage)
* Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm)
* Mechanical lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unladen approx. 910 mm (including 860 mm run-up slope)
* Chassis, bogie, drawbar and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* -- Permitted total weight of 30,000 kg technically possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
Iodpfx Ajx Ipavjb Aebf
* Available from calendar week 12/2026
* Sample image
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 ton BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic fenders; rear axle: straight, galvanized steel mudguards, each fitted with spray protection
* Reflective contour marking tapes at the sides and rear
* Folding lid (hot-dip galvanized) for the toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin power socket
* 4 stake pockets each side (stakes not included), also suitable for load securing
* Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, foldable and lowerable, loadable from all directions and embedded in the outer frame – corner rings 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper)
* Widening planks stored in middle of loading area
* Digger arm storage from rear axle to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the digger arm storage)
* Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm)
* Mechanical lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unladen approx. 910 mm (including 860 mm run-up slope)
* Chassis, bogie, drawbar and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* -- Permitted total weight of 30,000 kg technically possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
Iodpfx Ajx Ipavjb Aebf
* Available from calendar week 12/2026
* Sample image
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка




