Напівпричіп-самоскидSTAS
OP 10.60 48m³
Напівпричіп-самоскид
STAS
OP 10.60 48m³
фіксована ціна додається ПДВ
10 870 EUR
(12 935 EUR брутто)
Стан
Вживаний
Місцезнаходження
Korschenbroich-Glehn 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
10 870 EUR
(12 935 EUR брутто)
- Місцезнаходження продавця:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Німеччина

Зателефонувати
Технічні деталі
- Конфігурація осей:
- 3 осі
- Перша реєстрація:
- 07/2000
- Довжина вантажного відсіку:
- 10 000 мм
- Ширина вантажного відсіку:
- 2 480 мм
- Висота вантажного відсіку:
- 1 900 мм
- Об’єм вантажного відсіку:
- 48 м³
Деталі пропозиції
- ID оголошення:
- A207-22-547
- Референсний номер:
- 2560
- Оновлення:
- останній раз 12.12.2025
Опис
TÜV new!
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Fpjdpfx Asx Ep Nxja Ser
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Fpjdpfx Asx Ep Nxja Ser
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2002
Відправити запит
Телефон & Факс
+49 2182 ... оголошення
Ваше оголошення було успішно видалено
Виникла помилка




















