Напівпричіп з робочою платформоюFAYMONVILLE
MAX Trailer MAX200 Telesattel Megatrailer
Напівпричіп з робочою платформою
FAYMONVILLE
MAX Trailer MAX200 Telesattel Megatrailer
фіксована ціна додається ПДВ
49 750 EUR
(59 202 EUR брутто)
Стан
Вживаний
Місцезнаходження
Essen 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
49 750 EUR
(59 202 EUR брутто)
- Місцезнаходження продавця:
- Heegstraße 6-8, 45356 Essen, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 38 390 кг
- Загальна вага:
- 48 000 кг
- Конфігурація осей:
- 3 осі
- Перша реєстрація:
- 03/2024
- Наступна перевірка (TÜV):
- 03/2026
- Загальна ширина:
- 2 540 мм
- Обладнання:
- ABS
Деталі пропозиції
- ID оголошення:
- A204-21-315
- Референсний номер:
- 33271
- Оновлення:
- останній раз 31.10.2025
Опис
You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
Hjdpfoxth Adox Afdow
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
Hjdpfoxth Adox Afdow
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2003
Відправити запит
Телефон & Факс
+49 201 8... оголошення
Ваше оголошення було успішно видалено
Виникла помилка
















