Напівпричіп з рухомою підлогою

STAS bioSTAR ca 100 cbm 14,9 m Innenlänge

bioSTAR approx. 100 cbm, 14.9 m internal length

silver grey
BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR

Internal body length: approx. 14,900 mm
Internal body width: 2,475 mm
Body volume: approx. 90 cbm
Gross vehicle weight (GVW): 36 t
Axle spacing: 1,310 mm
Unladen weight: 8,500 kg
King pin height: 1,150 mm

TECHNICAL DESCRIPTION
1. CHASSIS
KING PIN HEIGHT: Precise king pin height is 1,150 mm.

AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD)
Capacity: 3 x 9 t
Suspension: Original SAF air suspension
Brakes: Large disc
Wheel offset: ET 120
Brake wear indicators (BVA) included
The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle.

CONNECTIONS
BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected.
LIFT AXLE FUNCTION: Without lift axle. Including traction aid.

TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included).

AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks.
STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included)

TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120.

BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR
Dual-line compressed air braking system in accordance with CE guidelines.
Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System)

LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC.

REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version.

HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs.

ACCESSORIES

EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side.

PNEUMATIC CENTRAL LOCKING: With pneumatic central locking.
TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm)
SPARE WHEEL HOLDER: Single aluminum spare wheel holder.

2. BODY
FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles.
INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket.

SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside.

WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm.

MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel.

FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob.

MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards.
Ibodpfxoxplxzj Agwec
FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps.

REAR DOOR: 2 portal h

Оголошення було перекладено автоматично. Можливі помилки перекладу.