Вантажівка з відкритою платформою

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Tatra Phoenix 41.500 8x8 All-wheel drive with Fassi crane featuring jib and winch
New vehicle with day registration 06/2025
Long-distance driver’s cab

Removable flatbed
Configurable as a tractor unit

* Model: TATRA PHOENIX
* Drive: 8x8/6, last axle driven and steered, planetary axles
* Engine: MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm
* 1000 - 1425 rpm
* Transmission: Automated ZF TraXon 16TX2640 gearbox, 16 speeds
* Steering: Left-hand drive
* Cab: Sleeper cab, H3279WHTE
* Gross weight: 41,500 kg
* Sleeper cab
* Side fenders
* External sun visor (green, translucent)
* Non-heated windshield
* Side and rear windows not glazed
* Electrically adjustable mirrors
* Convex mirrors
* Forward curb view mirror
* Central locking with remote control, 2 keys

Interior cabin:
* Luxury Air
* Storage compartment below the dashboard, long version
* Lower bed mattress, standard
Gsdpexb Hxmsfx Agnsbw
* Raised lower bed by 250 mm (sleeper cab, storage compartment 260 liters)
* No upper bed (long cab)
* Trailer couplings without center section
* Refrigerator or cooler (sleeper cab)
* Manual aluminum roof hatch
* Cabin air conditioning control
* Dashboard in 'Black Rock'
* Textil cabin wall covering
* Interior trim color 'DARK SAND'
* Immobilizer 5 minutes SCM BV03-B1
* Standard auxiliary power supply

Communication & Driving Management:
* ALPINE communication system with camera
* Antennas: AM/FM + 2x GSM + GPS
* Digital tachograph
* With cruise control
* Toll pre-installation (Germany only)

Wheels:
* Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed operation
* Spare wheel mounted on the chassis in transport position

Drive unit:
* MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm
* 1000 - 1425 rpm
* ZF 16TX2640TO TraXon, engine MX13 (355 kW, 390 kW)
* 2-stage final drive ratio 2.30 TRK 0.61/1.44 H8, downshiftable, shiftable from standstill

Chassis:
* Driven axle, axle load capacity 10t, small wheels
* 8x8/6 configuration

Crane:
- Model: F710RA.2 xhe-dynamic
- Infinite slewing range
- All hydraulic cylinders double-acting
- Hard-chromed piston rods
- Double linkage system with PROLINK
(articulated arm can be extended by up to 10 degrees)
- Electronic overload protection system with FX900
- FASSI stability control FSC-SII including LMB II
- Emergency stop and visual alarms (90% and 100%)
- Pressure limiting and load-holding valves
- XF System (Extra Fast), XP System (Extra Power), FL System (Full Lift)
- RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% alerts on display
- Danfoss D900 control block with 4 control valves mounted on the crane column
- Emergency crane control
- High-pressure filter supplied plumbed
- Separate hydraulic tank (260 l) with filter and oil cooler mounted at the crane base
- Hydraulic outriggers, extendable on both sides, support width 8.29 m
- Outriggers can be operated via wireless remote (black/white)
- IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control
- Standard color RAL 3020 traffic red, all cylinders painted black
- Load hook and short mounting brackets (500 mm)
- Transport position: folded across direction of travel
- Note: Observe vehicle voltage / 12V or 24V, standard 24V
- FASSI stability control FSC-S/II
- IE742 connection box
- Prepared for operation with variable displacement pump (LS)
- Proportional

Оголошення було перекладено автоматично. Можливі помилки перекладу.