Лісозаготівельна машина

Pfanzelt MORITZ FR 75

MORITZ FR 75
(0010) _RH-10575/6-II Pfanzelt forestry crawler
(0020) Dimensions:
(0030) - Crawler vehicle with rubber tracks (AS),
(0040) Track width 300 mm
(0050) - Hydraulically adjustable track width,
(0060) from 1,200 mm to 1,600 mm overall width
(0070) Telescopic via radio control
(0080) - Overall length with mounted winch and
(0090) dozer blade approx. 2,300 mm
(0100) - Ground clearance: approx. 320 mm
(0110) - Height to top of frame approx. 1,350 mm
(0120) - Approach angle approx. 50° at front and
degrees at rear
(0130) - Weight approx. 1.0 t in
(0150) standard configuration
(0160) Engine:
(0170) - Deutz diesel engine TD2.9L4,
4-cylinder, water-cooled, turbocharged
(0190) - Power 55 kW / 75 HP
(0200) - EU emission stage V
(0210) - Fuel tank capacity: approx. 45 l
(0220) - Hydraulic oil: approx. 30 l
(0230) - Cleanfix reversible fan
(0240) - Combined radiator for water/hydraulic oil
(0250) Travel hydraulics:
(0260) - Closed dual-circuit system
(0270) proportional (2 x 11 kW),
(0280) - All driving functions controllable by radio
(0290) - Pre-filtered fine oil filtration
(0310) - Infinitely variable travel speed:
(0320) 1st gear 0–3 km/h, 2nd gear approx. 0–6 km/h
(0330) - Maximum end speed steplessly adjustable
(0350) - Drift adjustment to compensate for
(0360) hillside forces during
(0370) mowing operations across slopes
(0380) - Automatically hydraulically tensioned
Pjdexbittspfx Aalegu
(0390) dual idler wheel
(0400) On-board hydraulics:
(0410) - Separate oil circuit, pump with approx.
l/min at 200 bar
(0430) - Standard package includes one proportional
(0440) control valve (for lift linkage) with float position
(0460) - In total, up to 4
(0470) proportional double-acting valves and
(0480) 2 on/off double-acting valves
(0500) Chassis:
(0510) - Torsion-resistant box section made of
(0520) special steel
(0530) - Large lockable storage compartment
(0540) integrated laterally in chassis
(0550) plus an open top compartment
(0560) - Lashing points for securing the crawler
(0570) - Large engine hood for maintenance work
(0580) - Full-length skid plate made of
(0590) solid steel
(0600) - All-around branch deflector with
(0610) integrated hood protection
(0620) - Standard rear linkage with max.
(0630) lifting force at coupling point: 11 kN
(0640) - Optional front linkage with max.
(0650) lifting force at coupling point: 7 kN
(0660) Operation of the entire machine:
(0670) - Radio remote control for all functions
(0680) - Emergency stop
(0690) - Engine speed adjustment
(0700) - Fan reversal
(0710) - Driving and steering
(0720) - 1st and 2nd gear
(0730) - Drift adjustment
(0740) - Winch control
(0750) - Dozer blade up/down
(0760) - Linkage float position
(0770) - Optional linkage relief
(0780) - Track width adjustment
(0790) - Travel direction reverse (directional reversal)
(0800) - PTO on/off
(0810) - Auxiliary control valves
(0820) - Winch operation/external consumers
(0830) - Signal horn
(0840) - Optional lighting
(0850) ALL RADIO COMMANDS ON ONE CONTROL LEVEL
(0860) PTO DRIVE Crawler with PTO drive
(0870) - Maintenance-free, oil-immersed and
(0880) oil-cooled multi-disc clutch
(0890) PTO speed at the gearbox approx.
rev/min at 2,100 rpm
(0910) Direction of rotation when viewed from the stub
(0920) in clockwise direction
(0930) WORKING HYDRAULICS Performance hydraulics crawler
(0940) LIFTING DEVICE Excavating device winch
(0950) TENVORHANG_F

Оголошення було перекладено автоматично. Можливі помилки перекладу.