Напівпричіп з низьким завантаженням

Faymonville 3-Achs-Semi-hydr. Ladeboden-hydr. Rampen

Gooseneck:
- Gooseneck in SNT design for optimizing the loading deck length, length approx. 3,700 mm
- Rear gooseneck with a chamfer of approx. 1,000 mm x 6°
- Technical fifth-wheel load: 18,000 kg
- Suitable for tractor units: 4 x 2 or 6 x 2

Psdpfowx E Hmjx Ah Hord
Loading Deck:
- Loading deck, length approx. 9,400 mm, with rear chamfer approx. 900 mm x 6°
- Loading area behind the gooseneck, hydraulically liftable and lowerable
- Loading area length approx. 3,000 mm. Load capacity up to approx. 9,000 kg

Ramps:
- One pair of two-part steel ramps, approx. 4,350 x 900 mm
- Hardwood decking
- Hydraulically foldable ramp tips
- Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward

Axles, Suspension, and Tires:
- BPW axles and suspension, two fixed axles, one steering trailing axle
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- Tires: 235/75 R 17.5

Included accessories:
- Removable steel front wall, approx. 400 mm high
- Round NATO socket on front connection rail (Maeler & Kaege VG 96 917)
- 3 kW electro-hydraulic power pack for hydraulic operations, except for hydraulic winches
- External beams on gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then every approx. 400 mm
- 2 pairs of screw-in lashing rings included (LC 5,000 daN)
- One mounting hole at the rear upper area of the external beams on the gooseneck for a bolted lashing ring
- 1 pair of screw-in lashing rings included (LC 10,000 daN)
- 3 pairs of recessed lashing rings inside the external beam of the gooseneck (LC 5,000 daN)
- 3 pairs of lashing rings in the center of the gooseneck (LC 5,000 daN)
- 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
- On the gooseneck, 1 pair of removable aluminium sideboards, approx. 400 mm high, anodized
- On the gooseneck, one removable aluminium rear board, approx. 400 mm high, anodized
- Hardwood decking above the gooseneck, approx. 40 mm
- 2" kingpin
- Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- Continuous hardwood decking (approx. 50 mm thick) on lift bed, interrupted between the axles
- 9 pairs of recessed lashing rings fitted flat in the outer frame of the loading deck, foldable outward (LC 10,000 daN)
- Of these, 3 pairs in the outer frame of the lift bed and 6 pairs in the outer frame of the loading deck
- 1 pair of foldable mechanical rear supports with one-hand operation
- Central lubrication system with one pump, brand BEKAMAX, with standard grease according to NLGI-2
- Hardwood decking on the chamfer of the loading deck
- 2 additional pairs of bolted lashing rings (LC 5,000 daN)
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire rope approx. 24 m long, rope Ø approx. 9.5 mm, incl. rope pressure roller
- 1 spare wheel with mounting adapter positioned under the loading deck on the right in front of axles
- 9 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- Of these, 3 pairs in the lift bed and 6 pairs in the rear section of the loading deck
- 1 INOX toolbox, approx. 620 x 300 /180 x 950 mm, left and right under the loading deck
- WABCO Smart Board system
- 1st axle with starting aid
- 1 reversing spotlight each left and right at the rear of the vehicle
- 4 warning panels, approx. 423

Оголошення було перекладено автоматично. Можливі помилки перекладу.