Напівпричіп з низьким завантаженням

Faymonville MAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.

Gooseneck:
-Gooseneck hydraulically raises/lowers and can be removed
-Length approx. 3,650 mm
-Extensive lashing positions
-For tractor units: 6 x 4 or 8 x 4

3-axle compact front chassis:
-Hook attachments at the front and rear
-Chassis length x chassis width approx. 3,560 mm x 2,850 mm
-Extensive lashing positions

Excavator bridge "BB-A":
-Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear
-Length x base width approx. 7,150 mm x 2,850 mm
-Beam height x beam width approx. 430 mm x 1,350 mm
-Loading height 580 mm with ground clearance 150 mm
-5 pairs Hanging lashing rings (LC 10,600 daN)
-4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings

5-axle rear chassis:
-Mechanical bolt-on coupling for attaching a drop-bed at the front, end cross member at the rear
-Chassis length x chassis width approx. 6,840 mm x 2,850 mm
-Extensive lashing positions

Pendulum axle and tires (front and rear chassis):
-"PENDULUM AXLE", all axles hydromechanically forced steered
-Hose rupture valve on the axle compensation cylinder with automatic RESET function
-Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position
-Final painting of the axles with two coats of 2-component paint, painted in MB 7350 Nova Gray
-Technical axle load: 14,640 kg (62) km/h)
-Hydraulic axle compensation
-Axle tool
-Tires 285/70 R19.5

Steering:
-Steering can be operated from the front and rear using a cable remote control with push buttons, with axle alignment control
-Socket for operating the steering on the gooseneck
-Cable remote control with push buttons including axle alignment control

Accessories included:
-Yellow-red air couplings on the galvanized connection strip at the front
-Steel bulkhead, approx. 400 mm high
-4 wheel chocks with brackets
-2 spare wheels 285/70 R19.5
-3.5" kingpin
-Gallows with winch for spare wheel on the front of the gooseneck
-Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must have a capacity of at least 80 liters. Couplings
-White reflective tape in accordance with EU regulations on the sides and extension, red at the rear
-Aluminum side walls and rear wall, approximately 400 mm high, anodized, attachable to the gooseneck
-Operating lever on the gooseneck protected by a hinged cover
-A separate air connection with an air gun on the gooseneck
-Bekamax central lubrication system with NLGI-2 grease, 1x on the gooseneck, 1x on the 3-axle chassis, and 1x on the 5-axle chassis
-Variomax tool kit
-Multi-coupling hydraulic connections in the area of the low-bed hook receptacle
-Front chassis with a separate air connection for pneumatic screwdrivers
-Screw-in option (ø 40 mm) every approximately 500 mm on the outside of the upper chord of the outer tube of the excavator bridge for screw rings
-Foldable extensions with steel mattresses, adjustable in width from approximately 2,850 mm to approx. 3,250 mm
-Steel mattresses with rubber flooring, approx. 12 mm thick
Njdpfxswhywfj Agtswl
-Two stainless steel toolboxes (855 x 340 x 390 mm)
-Radio remote control for the steering in addition to the cable remote control
-Painted sand layer as anti-slip protection
-1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Оголошення було перекладено автоматично. Можливі помилки перекладу.