Причіп зі змінним кузовом

WECON 4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt

WhatsApp
WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body
Duke Type WPR 715 SG
Year of manufacture 06/2017
First German owner!
3 WPR 715 SG trailers with the following equipment:
WECON standard swap body with sliding curtains, Duke, type WPR 715 SG
External dimensions
Body length: 7,150 mm
Body width: 2,550 mm
Interior dimensions
Body length: 7,040 mm
Body width: 2,480 mm
Terrain weight: 2,590 kg
Gross weight: 16,000 kg
Interior height 2,200 mm with sliding roof included
Exterior height 2,450 mm (corner height 2,450 mm = C 00)
Side loading height: 2,120 mm
Rear loading height: 2,165 mm
Forklift pockets on the rear of the floor frame
Reinforced zinc tubes for carrying a truck-mounted forklift.
Chain lock bracket required on the body.
--> Centering tunnel restricted due to reinforced design
Suitable for continuous use!
Floor frame: Made of high-quality galvanized steel, overall height 215 mm,
4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm
Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift accessible, suitable for an axle load of up to 5,460 kg
Rigid support legs, parking height 1,320 mm, galvanized version
15 pairs of lashing rings. Layout: From the front of the trailer to the middle of the first pair of lashing rings, approximately 400 mm long. Then distribute the remaining lashing rings evenly.
Lashing rings, 1 pair, mounted on the inside of the front wall stanchion, 1000 mm high from the top edge of the floor.
Pallet stop edge 30 mm high on one side, on the left side in the direction of travel, normal tarpaulin side.
Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm.
The loading height is reduced by 30 mm.
Front wall: smooth, bolted steel front wall, full-height cassette construction (cassettes galvanized).
Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick.
Inner front wall with impact protection consisting of 300 mm high, galvanized sheet steel.
Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf.
Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure release.
1 center stanchion, symmetrically arranged --> Left-hand direction of travel
Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor
8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers.
- Vertical tarpaulin tensioners are omitted
- Center stanchions are omitted
- Horizontal insert slats are omitted
Fixed tarpaulin roof: sliding roof, standard only with locking mechanism.
Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and
powder-coated in standard RAL colors,
Roof tarpaulin: RAL 9010 (pure white)
Side tarpaulin: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Gusdpfx Afev Rtyaoxoh
Rear portal: RAL 9010 (pure white)
TÜV Certificate Code XL included
This certificate confirms the load

Оголошення було перекладено автоматично. Можливі помилки перекладу.