Низькорамний причіпMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Низькорамний причіп
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
Рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
29 900 EUR
(35 581 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 10 750 кг
- Загальна вага:
- 14 400 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 7 000 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A186-10-241
- Референсний номер:
- 6180
- Оновлення:
- останній раз 14.01.2026
Опис
* ETÜ-TA-R 14.4:
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
Ffedpfev D Tcbjx Ag Aou
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
Ffedpfev D Tcbjx Ag Aou
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 571 km
Причіп з робочою платформою
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Мала оголошення
Roosendaal
1 934 km
Резервуарний контейнер
CIMC20FT ISO, 25.050L / 1-COMP / 3 BAFFELS / T11 / ...
CIMC20FT ISO, 25.050L / 1-COMP / 3 BAFFELS / T11 / ...
Ваше оголошення було успішно видалено
Виникла помилка

























































































