Низькорамний причіпMÜLLER-MITTELTAL
18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Низькорамний причіп
MÜLLER-MITTELTAL
18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Фіксована ціна додається ПДВ
39 900 EUR
(47 481 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Основні дані
Ціна та місцезнаходження
Фіксована ціна додається ПДВ
39 900 EUR
(47 481 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
Габарити та вага
Загальна вага:
18 000 кг
Максимальна вага навантаження:
13 600 кг
Довжина вантажного відсіку:
5 000 мм
Ширина вантажного відсіку:
2 420 мм
Висота вантажного відсіку:
700 мм
Осі та колеса
Конфігурація осей:
2 осі
Деталі пропозиції
- ID оголошення:
- A180-67-421
- Референсний номер:
- 61371
- Оновлення:
- останній раз 19.11.2026
Опис
* KA-TA-RT 18.0:
----Brakes:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, as well as RtR valve and manual lowering for loading process
----Drawbar / Flange drawbar:
* Drawbar with positive height adjustment
* 50 mm flange drawbar
----Electrical system / Lighting:
* 15-pin 24 V
* LED tail lights 12 / 24 V in the underrun protection
----General components:
* Support winch at the front
* Outrigger supports at the rear
* Plastic toolbox - approx. 750 x 350 x 300 mm - mounted on the right side
* Plastic quarter fenders
----Tipping bridge:
* Steel pallet - 3-sided tipping superstructure made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder
* Front panel fixed, made of smooth sheet metal
* Hardwood support for excavator bucket screwed onto the front panel
* Continuous side walls - without center support - foldable with side wall spring lifter and pivoting via manual central locking
* Rear crossmembers screwed on
Kdsdpfsvin T Ssx Apyow
* Combination steel wing doors - rear wall divided into 2 asymmetrical leaves - can be pivoted and locked through 270°, not foldable - and with additional pivoting frame for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch and central locking, deactivation function for automatic rear wall opening during rear tipping with the wing door open
* 4 mm steel sheet floor
* 2-step entrance on the front right side
* Mounting rail at the rear for the loading ramps
----Load securing:
* 1 x 7 t lashing eye in each corner
* 4 x 3 t lashing eyes on each side, recessed in the outer frame
----Loading ramps:
* Mounting shaft for loading ramps recessed in the rear of the chassis
* 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles
----Painting:
* Chassis, drawbar, rear crossmembers, front panel, tipping platform, underrun protection, folding supports at the rear hot-dip galvanized
* Painting of the side walls in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion
* Axles, air tank, flange drawbar, support winch at the front painted in a black tone
----Information:
* --Load securing certificate according to EN 12642 XL?
* Errors and prior sale reserved
----Delivery time:
* available for immediate delivery from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Suspension:
* Air suspension with lifting and lowering system, as well as RtR valve and manual lowering for loading process
----Drawbar / Flange drawbar:
* Drawbar with positive height adjustment
* 50 mm flange drawbar
----Electrical system / Lighting:
* 15-pin 24 V
* LED tail lights 12 / 24 V in the underrun protection
----General components:
* Support winch at the front
* Outrigger supports at the rear
* Plastic toolbox - approx. 750 x 350 x 300 mm - mounted on the right side
* Plastic quarter fenders
----Tipping bridge:
* Steel pallet - 3-sided tipping superstructure made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder
* Front panel fixed, made of smooth sheet metal
* Hardwood support for excavator bucket screwed onto the front panel
* Continuous side walls - without center support - foldable with side wall spring lifter and pivoting via manual central locking
* Rear crossmembers screwed on
Kdsdpfsvin T Ssx Apyow
* Combination steel wing doors - rear wall divided into 2 asymmetrical leaves - can be pivoted and locked through 270°, not foldable - and with additional pivoting frame for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch and central locking, deactivation function for automatic rear wall opening during rear tipping with the wing door open
* 4 mm steel sheet floor
* 2-step entrance on the front right side
* Mounting rail at the rear for the loading ramps
----Load securing:
* 1 x 7 t lashing eye in each corner
* 4 x 3 t lashing eyes on each side, recessed in the outer frame
----Loading ramps:
* Mounting shaft for loading ramps recessed in the rear of the chassis
* 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles
----Painting:
* Chassis, drawbar, rear crossmembers, front panel, tipping platform, underrun protection, folding supports at the rear hot-dip galvanized
* Painting of the side walls in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion
* Axles, air tank, flange drawbar, support winch at the front painted in a black tone
----Information:
* --Load securing certificate according to EN 12642 XL?
* Errors and prior sale reserved
----Delivery time:
* available for immediate delivery from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
158 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Egestorf
1 572 km
Трьохсторонній самоскидний причіп
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Bassum
1 654 km
автомобільний автовоз-причіп
Brian James Trailers231-5522-35-3-10
Brian James Trailers231-5522-35-3-10
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Reichertshofen
1 448 km
Відкритий причіп з тентом
BLYSSCondor IV Hochlader 400x200x200cm 2700kgGG
BLYSSCondor IV Hochlader 400x200x200cm 2700kgGG
Успішно
Ваше повідомлення надіслано.
Мала оголошення
Reichertshofen
1 448 km
Автомобільний автовоз-причіп
BLYSSGalaxy Autotransporter 460x212x4cm 2700kgGG
BLYSSGalaxy Autotransporter 460x212x4cm 2700kgGG
Ваше оголошення було успішно видалено
Виникла помилка

















































































