Напівпричіп з низьким завантаженням

FAYMONVILLE 5-Achs-Doppel-Tele-Semi-Sattelauflieger

Gooseneck:
Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4

Loading area:
Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support.
Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length.

Axles and tires:
BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering.
1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve
Hfjdpfx Adjrigw Rs Rep
Manufacture of our choice

Sockets and lighting:
24-volt lighting system Design in accordance with EU regulations
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
Complete HRM metallization
Complete steel construction shot blasted, then hot-finished with ZINACOR 850

Paint:
6-K final treatment: Complete steel construction shot blasted after welding
1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax

Accessories:
Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know
3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches
On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle
1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2
Removable protection around the central lubrication pump(s)
Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit
Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member
Manual and description
One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design
Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly
Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Оголошення було перекладено автоматично. Можливі помилки перекладу.