Причіп з робочою платформоюMÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
Причіп з робочою платформою
MÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
фіксована ціна додається ПДВ
24 950 EUR
(29 690 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
24 950 EUR
(29 690 EUR брутто)
- Місцезнаходження:
- Eichenstich 12, 21272 Egestorf, Deutschland

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 8 870 кг
- Загальна вага:
- 11 900 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A145-49-752
- Референсний номер:
- 58531
- Оновлення:
- останній раз 23.07.2026
Опис
* ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange coupling:
* Drawbar with 300 mm height adjustment
* 40 mm flange coupling
----General components:
* Jost landing gear at the front
* External, hot-dip galvanized folding supports at the rear
* Plastic quarter fenders
* Plastic toolbox on the front right side, on the front panel
Bsdeq Ra D Eepfx Apielk
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* LED lighting
----Loading platform:
* Loading platform 6.27 m
* Suitable for container transport
* 50 mm hardwood floor
* Provision on the front panel for retrofitting container locking mechanisms
* Bolted front panel made of smooth sheet metal
* Side walls made of trapezoidal steel sheet, foldable with side board spring lifts
* Steel rear wall can be slid in between the ramp supports when not in use, positioned inside in front of the front panel
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approximately 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing eyes possible every 600 mm
* 1 x 6.3-ton lashing eye at each front and rear corner
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be telescoped together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars, and loading ramps
* Painting of the side boards in RAL 9010 pure white
* Painting of the side walls in a RAL color possible at an extra charge
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available for immediate delivery from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange coupling:
* Drawbar with 300 mm height adjustment
* 40 mm flange coupling
----General components:
* Jost landing gear at the front
* External, hot-dip galvanized folding supports at the rear
* Plastic quarter fenders
* Plastic toolbox on the front right side, on the front panel
Bsdeq Ra D Eepfx Apielk
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* LED lighting
----Loading platform:
* Loading platform 6.27 m
* Suitable for container transport
* 50 mm hardwood floor
* Provision on the front panel for retrofitting container locking mechanisms
* Bolted front panel made of smooth sheet metal
* Side walls made of trapezoidal steel sheet, foldable with side board spring lifts
* Steel rear wall can be slid in between the ramp supports when not in use, positioned inside in front of the front panel
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approximately 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing eyes possible every 600 mm
* 1 x 6.3-ton lashing eye at each front and rear corner
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be telescoped together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars, and loading ramps
* Painting of the side boards in RAL 9010 pure white
* Painting of the side walls in a RAL color possible at an extra charge
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available for immediate delivery from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
171 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 572 km
Низькорамний причіп
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Мала оголошення
Langelsheim
1 533 km
Самоскид
MAN26.430 6x2 Retarder Meiller RK 20.70
MAN26.430 6x2 Retarder Meiller RK 20.70
Мала оголошення
Nürnberg
1 475 km
Колісний навантажувач з повним керуванням 20 км/год
MECALACAF1050
MECALACAF1050
Мала оголошення
Diespeck
1 504 km
Самоскид
MAN26.403 FL 6x2
MAN26.403 FL 6x2
Мала оголошення
Peine
1 544 km
Контейнеровоз з гачком (рол-офф)
ANDERE
ANDERE
Ваше оголошення було успішно видалено
Виникла помилка



































































































