Напівпричіп з робочою платформою

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk,hydr. Auffahrram.

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes

----Axles:

* 3 x 11 ton BPW Eco Plus axles
* Rear axle is self-steering with electro-pneumatic steering lock

----Suspension:

* Air suspension with lift/lower mechanism and RtR valve

----Electrics / Lighting:

* TPMS (Tire Pressure Monitoring System)
* Smartboard control unit mounted on the trailer as an info tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12/24V
* Removable LED beacon, mounted at rear left

Crjdpfspk D I Aox Ak Hsb
----General attachments/accessories:

* Side underrun protection
* Landing gears at the front and mechanical swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder underneath the chassis, on the right side

----Low Loader Deck:

* Saddle platform with front corners chamfered at 45°, and a front-mounted toolbox made of galvanized steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid
* 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) mounted on the saddle platform
* 150 mm high rear board, slotted in
* Rear slope on the saddle platform leading to the lowbed, approx. 700 mm long
* Saddle platform fitted with 50 mm wooden planks; lowbed platform with 60 mm wooden planks
* Tread plate over the axles

----Widenings:

* 8 mechanical fold-out extensions to 3 m total width (except on the rear slope; extension planks included with storage on the saddle platform)
* Mechanically adjustable warning panel sets at front and rear

----Load Securing (Lashing Package):

* On the saddle platform: 2 x 6.3 t lashing rings on each side, 3 x 5 t lashing rods on each side in the outer frame
* On the lowbed platform (sides): 2 x 13.4 t lashing rings on each side plus 4 x 10 t lashing rings, swiveling and retractable, recessed into the outer frame
* On the sides: 2 x 6.4 t lashing eyes each, plus 1 lashing ring at the rear in the excavator arm support
* 2 x container locks directly after the gooseneck in the lowbed platform

----Excavator Arm Support:

* Continuous excavator arm tray from the end of the last fixed axle, over the steering axle, up to the end cross member, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Loading Ramps:

* Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way valve block for future customer retrofitting of hydraulic ramp shifting
* Outer plank on the ramp made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the approach slope

----Hydraulics:

* Hydraulic flow divider in the trailer (for hydraulic pump capacities on truck from 40 l/min up to 120 l/min)

----Loading dimensions:

* Saddle platform loading area: approx. 3,935 x 2,480 mm
* Lowbed loading area: approx. 8,500 x 2,520 mm
* Unladen load height approx. 910 mm (incl. 860 mm approach slope)

----Fifth wheel height:

* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)

----Paint/Finish:

* Chassis, loading ramps, rear support legs, and extension consoles hot-dip galvanized
* Axles, landing gears, air tanks painted in a shade of black
* Vehicle is hot-dip galvanized

----Info:

* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images may show equipment features not included with the offered vehicle

----A

Оголошення було перекладено автоматично. Можливі помилки перекладу.