Низькорамний причіпMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Низькорамний причіп
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
фіксована ціна додається ПДВ
35 900 EUR
(42 721 EUR брутто)
рік випуску
2025
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
35 900 EUR
(42 721 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 14 400 кг
- Загальна вага:
- 19 000 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A107-45-933
- Референсний номер:
- 6160
- Оновлення:
- останній раз 10.07.2025
Опис
* ETÜ-TA-ER 19.0:
Credpfx Ajmi Tcqsatei
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Credpfx Ajmi Tcqsatei
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка




















































