Низькорамний причіпMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampen
Низькорамний причіп
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampen
фіксована ціна додається ПДВ
29 950 EUR
(35 640 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
29 950 EUR
(35 640 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 14 660 кг
- Загальна вага:
- 19 000 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 6 270 мм
- Ширина вантажного відсіку:
- 2 470 мм
- Висота вантажного відсіку:
- 400 мм
Деталі пропозиції
- ID оголошення:
- A104-27-177
- Референсний номер:
- 5834
- Оновлення:
- останній раз 11.06.2026
Опис
ETÜ-TA-R 19.0:
----Brakes:
* Wabco EBS braking system
Bsdsl Th Hlspfx Al Ssli
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer
----Drawbar / Flange coupling:
* Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pin power connector
* LED tail lights
* TPMS (Tire Pressure Monitoring System)
----General components:
* Jost support leg at the front
* Outboard folding supports at the rear
* Side underrun protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* Mounting point in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoidal profile - foldable with side rail spring lift
* Steel rear wall that slides in between the ramps - holder when not in use inside the front wall
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side walls in RAL 9010 pure white
* Painting of the side walls in an RAL color possible for an extra charge
* Axles, springs, air tank, flange coupling, and support leg painted in a black tone
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf near the A7.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
----Brakes:
* Wabco EBS braking system
Bsdsl Th Hlspfx Al Ssli
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer
----Drawbar / Flange coupling:
* Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pin power connector
* LED tail lights
* TPMS (Tire Pressure Monitoring System)
----General components:
* Jost support leg at the front
* Outboard folding supports at the rear
* Side underrun protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* Mounting point in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoidal profile - foldable with side rail spring lift
* Steel rear wall that slides in between the ramps - holder when not in use inside the front wall
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side walls in RAL 9010 pure white
* Painting of the side walls in an RAL color possible for an extra charge
* Axles, springs, air tank, flange coupling, and support leg painted in a black tone
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf near the A7.
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
171 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Мала оголошення
Egestorf
1 571 km
Причіп з робочою платформою
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ваше оголошення було успішно видалено
Виникла помилка













































































