Низькорамний причіпMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Низькорамний причіп
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
фіксована ціна додається ПДВ
43 900 EUR
(52 241 EUR брутто)
Рік випуску
2026
Стан
Новий
Місцезнаходження
Egestorf 

Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
43 900 EUR
(52 241 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Максимальна вага навантаження:
- 23 830 кг
- Загальна вага:
- 30 000 кг
- Конфігурація осей:
- 3 осі
- Довжина вантажного відсіку:
- 8 460 мм
- Ширина вантажного відсіку:
- 2 520 мм
Деталі пропозиції
- ID оголошення:
- A104-27-075
- Референсний номер:
- 6098
- Оновлення:
- останній раз 06.05.2026
Опис
* T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning panel packages at front and rear
* Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable warning beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side (no stakes included), each with integrated lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper)
* Widening boards stored in the center of the load platform
* Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* One-piece hydraulic loading ramps (approx. 3,000 x 720 mm)
* 4-way valve block for later retrofitting of hydraulic ramp adjustment
* Mechanical lateral ramp adjustment
* Load platform over turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach slope)
* Chassis, bogie, drawbar and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black finish
* 235/75 R 17.5 twin tires
* Unladen weight: 5,900 kg
Ppjdpfxsl Th Ade Abrst
* --Permissible gross weight technically up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning panel packages at front and rear
* Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable warning beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side (no stakes included), each with integrated lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper)
* Widening boards stored in the center of the load platform
* Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* One-piece hydraulic loading ramps (approx. 3,000 x 720 mm)
* 4-way valve block for later retrofitting of hydraulic ramp adjustment
* Mechanical lateral ramp adjustment
* Load platform over turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach slope)
* Chassis, bogie, drawbar and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black finish
* 235/75 R 17.5 twin tires
* Unladen weight: 5,900 kg
Ppjdpfxsl Th Ade Abrst
* --Permissible gross weight technically up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
170 Оголошення онлайн
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
Ваше оголошення було успішно видалено
Виникла помилка

















































