Трьохсторонній самоскидний причіпMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Трьохсторонній самоскидний причіп
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
фіксована ціна додається ПДВ
28 500 EUR
(33 915 EUR брутто)
рік випуску
2024
Стан
Новий
Місцезнаходження
Egestorf 

Зображення показують
Показати карту
Основні дані
Ціна та місцезнаходження
фіксована ціна додається ПДВ
28 500 EUR
(33 915 EUR брутто)
- Місцезнаходження продавця:
- Eichenstich 12, 21272 Egestorf, Німеччина

Зателефонувати
Технічні деталі
- Загальна вага:
- 11 900 кг
- Максимальна вага навантаження:
- 8 620 кг
- Конфігурація осей:
- 2 осі
- Довжина вантажного відсіку:
- 5 500 мм
- Ширина вантажного відсіку:
- 2 420 мм
- Висота вантажного відсіку:
- 500 мм
Деталі пропозиції
- ID оголошення:
- A104-27-000
- Референсний номер:
- 5892
- оновлення:
- останній раз 25.06.2025
Опис
* KA-TA-R 11.9:
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
Njdpfx Aol Thx Eoaljdc
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
Njdpfx Aol Thx Eoaljdc
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
Оголошення було перекладено автоматично. Можливі помилки перекладу.
Постачальник
Примітка: Зареєструйтеся безкоштовно або увійдіть в систему, щоб отримати доступ до всієї інформації.
Зареєстровано з: 2001
Відправити запит
Телефон & Факс
+49 40 33... оголошення
Ці оголошення також можуть вас зацікавити.
мала оголошення
Egestorf
1 572 km
Низькорамний причіп
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Ваше оголошення було успішно видалено
Виникла помилка




















































